Chuột Không Dây Tĩnh Âm ROBOT M330 Khoảng Cách Tín Hiệu 20m - TẶNG KÈM PIN
Thương Hiệu ROBOT
Model: M330
Chuột quang không dây 2.4Ghz
Khoảng cách làm việc: 20m
Độ phân giải: 1600DPI
Tần số phản hồi: 500Hz
Chuột tĩnh âm click chuột không nghe tiếng
Cảm biến quang học chuẩn xác
Lõi Pin IC thông minh
Màu sắc: Koala, Hedgehog
Trọng lượng: 58gr
Kích thước: 110 * 59,92 * 30,63mm
Tính năng:
Thiết kế nhỏ gọn, tinh tế sang trọng.
Chuột tĩnh âm, không gây ồn khi sử dụng.
Con lăn chuột được thiết kế nút tròn giúp người dùng thao tác dễ dàng
Công nghệ IC tiết kiệm điện năng, tuổi thọ pin lên đến 12 tháng
Sử dụng đầu thu Nano kết nối với máy tính là có thể sử dụng ngay. Đầu thu Nano đặt bên trong chuột. Khi không sử dụng chuột có thể tắt nguồn chuột để tiết kiệm pin
- Sale!Chất lượng âm thanh thu âm tiếng, giọng nói, giọng đọc cực tốt. Không bị bể tiếng. Bass trầm và treble tươi sáng. Dùng cho Điện thoại di dộng khi quay video làm vlog, làm clip, chat video, chat zalo. Giúp cho giọng nói của bạn trở nên tuyệt vời hơn bao giờ hết. Jack 3.5 li chuẩn 4 ngấn ( 3 vạch ) dùng cho điện thoại, laptop. Sản phẩm bao gồm 1 Microphone kẹp áo, 1 lọc gió. 1 túi đựng.
- Sale!Out of stockSOUND CARD CREATIVE X-FI EXTREME MUSIC new 99% Chuyên nghe nhạc với âm thanh siêu cấp, treble sáng hơn, bass mạnh hơn. Thu âm chuyên nghiệp , chất lượng vocal cực hay. Toàn bộ chân cắm mạ vàng . Dành cho các bạn chuyên nghe nhạc, mix nhạc, thu âm, karaoke... ============ Thông số: Improve your PC's sound performance with theCreative Sound Blaster X-Fi SB0460 7.1 PCI Sound Card! This card features theCA20K1-PAG audio processorand connects to your desktop PC via the PCI interface. TheSound Blaster X-Fi SB0460is a great value for 7.1-channel speaker systems.
- General Features:
- CA20K1-PAG audio controller
- PCI interface
- 109 dB. Signal to Noise Ratio (SNR)
- 0.004% Total Harmonic Distortion + Noise (THD+N)
- ADC and DAC resolution 24 bits
- Record/Playback Sampling Rates:
- Recording: 8.0 kHz, 11.025 kHz, 16.0 kHz, 22.05 kHz, 24.0 kHz, 32.0 kHz, 44.1 kHz, 48.0 kHz and 96.0 kHz
- Playback: Any arbitrary sampling rate <= 192 kHz
- Line-in Full Scale Input: 2.0 Vrms
- Line-out Full Scale Output: 2.0 Vrms
- Microphone Input Impedance: >4.0k ohms
- Line-in Impedance 10K ohms
- PCI Bus Mastering:
- PCI specification up to version 2.3 compliant
- Bus mastering reduces latency and speeds up system performance
- Sound Blaster X-Fi Audio Processor:
- Advanced hardware accelerated digital effects processing
- All new dedicated DSP capable of both time and frequency domain audio processing
- 128 3D voices with advanced 3D positional audio rendering algorithms
- Professional quality digital mixing and equalization maintaining 24-bit accuracy
- User-selectable Master Sampling Rate for bit-matching professional audio applications
- Ultra-high quality sample rate conversion for gaming and professional audio applications
- Professional Digital Audio Processing:
- 24-bit Analog-to-Digital conversion of analog inputs at 96 kHz sample rate
- 24-bit Digital-to-Analog conversion of digital sources at 96 kHz to analog 7.1 speaker output
- 24-bit Digital-to-Analog conversion of stereo digital sources at 192 kHz to stereo output
- 16-bit to 24-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, ,44.1, 48 and 96 kHz
- ASIO 2.0 support at 16-bit/44.1 kHz, 16-bit/48 kHz, 24-bit/44.1 kHz, 24-bit/48 kHz and 24-bit/96 kHz
- Supports Sony/Philips Digital Interface (SPDIF) format of up to 24-bit/96 kHz quality
- SPDIF output at selectable sampling rate of 44.1, 48 or 96 kHz
- SPDIF output not available during playback of protected digital audio content authored with DRM (Digital Rights Management) technology
- ASIO 2.0 with direct monitoring
- Accelerated ASIO for ultra low latency
- Enhanced SoundFont support of up to 24-bit resolution
- Flexible Mixer Control:
- Selectable input source or mixing of various audio sources for recording
- Adjustable master volume control
- Separate bass and treble control
- Front and rear balance control
- Muting, soloing and panning control for mixer sources
- Mode Selector Control:
- Three exclusive working modes (Entertainment Mode, Audio Creation Mode and Game Mode), optimized to perform key tasks within each category of usage
- Creative MultiSpeaker Surround (CMSS):
- CMSS-3DSurround: Up mixes mono or stereo sources to 4, 5.1, 6.1 or 7.1 channels
- CMSS-3DHeadphones: Provides a multichannel playback experience over headphones for all types of content
- CMSS-3DVirtural: Provides a multichannel playback experience over two loudspeakers for all types of content
- CMSS-3DInteractive: Delivers multichannel 3D audio positioning for 3D games and 3DMIDI. Works in conjunction with CMSS-3DHeadphone and CMSS-3DVirtual to provide advanced 3D positional audio over headphones and two or four loudspeakers
- THX Certification:
- Sound Blaster X-Fi has received the prestigious THX Multimedia Certification award, making it the perfect choice for PC audiophiles seeking the very best music and movie experiences.
- Dolby Digital and Digital Surround EX Decoding:
- Decodes Dolby Digital Surround EX to 7.1 or 6.1 channels, or will pass through a compressed SPDIF bit stream to an external decoder
- Bass Redirection: Enhances bass output to subwoofer for small satellite speaker systems
- Crossover Bass Frequency (10-200 Hz): Adjustable to standalone subwoofer units for desired bass level
- Adjustable Center, Rear Center and LFE level control
- DTS-ES:
- Support DTS decoding for 5.1 audio
- Support DTS-CD playback and decoding for 5.1 audio
- Support DTS-ES for 7.1/6.1 audio
- DTS-ES Matrix 6.1 for decoding 5.1-channel soundtracks with a back surround channel matrix encoded into the left and right surround channel
- DTS-ES Discrete 6.1 for 6.1 soundtracks mastered with a discrete back surround channel
- Support DTS Neo: 6 for up mixing two-channel matrix-encoded sources
- I/O Ports:
- One (1) AD Link connector
- One (1) FlexiJack (3-in-1 function jack Microphone in/Line-in/Digital I/O connections)
- One (1) Line-out jack (number one)
- One (1) Line-out jack (number two)
- One (1) Line-out jack (number three)
- Power Consumption:
- Vcc, nominal current 1000 mA
- +12V, nominal current 150 mA
- -12V, nominal
- Internal Headers:
- One (1) CD IN analog input
- One (1) Power (powers the X-Fi I/O console not included)
- One (1) AD_EXT connector
- One (1) SPDIF_10 connector
- Regulatory Approvals:
- FCC
- CE
- BSMI
- MIC
- WEEE
- Sale!HÀNG CHÍNH HÃNG LOGITECH NGHE RẤT HAY
- Sale!USB bluetooth chuẩn 5.0 dành cho máy tính, PC, Laptop, TV, máy chiếu... Chuẩn 5.0 mới nhất 2019 Kết nối máy tính, laptop, TV đến loa bằng USB không dây.